Amplifier - Installation

INSTALLATION






INSTRUMENT PANEL AMPLIFIER





NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection .

1. Position amplifier (2) into place.
2. Install mounting fasteners (1).





3. Connect electrical harness connectors.
4. Install the steering column opening cover. Steering Column Opening Cover - Installation.
5. Connect battery negative cable.

REAR SHELF AMPLIFIER (SRT ONLY)





1. Install the amplifier to the mounting plate (1).
2. Connect the electrical connector.
3. Install the four mounting fasteners (2).
4. Install the rear shelf trim. Rear Shelf Panel - Installation.
5. Connect the battery negative cable.