Lower

LOWER





1. Engage the seat belt webbing through the slit and into the slot in the upper end of the lower B-pillar trim (3) and position the trim to the inside of the B-pillar (1). Be certain the webbing is not twisted.
2. Press fit the lower end of the lower B-pillar trim to the front and rear door opening sills.
3. Install and tighten the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills. Tighten the screws to 2 Nm (22 in. lbs.).
4. Move aside the seat belt webbing to install and tighten the two screws (2) that secure the upper end of the lower B-pillar trim to the inside of the B-pillar. Tighten the screws to 2 Nm (22 in. lbs.).
5. Reinstall the scuff plate trim onto the rear door sill. Scuff Plate - Installation.
6. Reinstall the lower cowl trim onto the front door opening sill. Cowl Trim Panel - Installation.