Rear Seats

REMOVAL






NOTE: Rear seat cushion shown, rear seat back similar.

NOTE: The factory installed heating elements can be removed from the foam cushions by carefully peeling the element off along the adhesive lines.

1. Disconnect and isolate the negative battery cable.
2. Remove the appropriate seat cushion cover, Seat Cushion Cover - Removal or seat back trim cover, Seat Cushion Cover - Removal.
3. Disconnect the inoperative heated rear seat cushion or seat back element electrical connectors (2).





4. Remove the inoperative heating element by peeling it away from the foam cushion, being careful not to remove excessive foam in the process.