Left

LEFT EXHAUST MANIFOLD





1. Disconnect negative battery (1) cable.





2. Raise vehicle on hoist.
3. Install exhaust manifold gasket (3) and manifold (4). Tighten bolts starting at the center working outward to 23 Nm (200 in. lbs.).
4. Instal manifold lower heat shield (6) and upper heat shield (1). Tighten fasteners to 28 Nm (250 in. lbs.).
5. Install exhaust pipes to manifoldsCatalytic Converter - Installation.
6. Connect down stream oxygen sensor connectors.
7. Lower vehicle.





8. Install oxygen sensor (2) and connect electrical connector.





9. Connect negative battery (1) cable.