Rear-Wheel-Drive

REAR-WHEEL-DRIVE





1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throttle body. Air Cleaner Body - Removal





4. 2.7L/3.5L Engines - Unthread tube nut, then remove pressure hose (2) from pump (1).





5. 5.7L/6.1L Engines - Unthread tube nut, then remove pressure hose (2) from pump (1).





6. 3.0L Diesel Engine - Unthread tube nut, then remove pressure hose (2) from pump (1).

7. Raise and support vehicle. Service and Repair
8. Remove belly pan. Belly Pan - Removal





9. Remove screw (5) securing pressure hose (1) routing clamp to front of engine cradle (3).
10. Remove screw (4) fastening routing clamps securing pressure (1) and return (2) hoses to right side of engine cradle (3).





11. Unthread pressure hose tube nut (2) from steering gear (1).
12. Remove pressure hose from vehicle.