Throttle Body - Installation

2.7L






NOTE: Make sure the intake gasket is clean and free of debris. Inspect the intake gasket for damage. Replace as necessary.

1. Install throttle body gasket.






CAUTION: DO NOT OVER TORQUE. Over tightening can cause damage to the throttle body, gaskets, bolts and/or the intake manifold.

2. Install throttle body, and bolts to intake manifold.






CAUTION: The throttle body must be torqued in a mandatory torque sequence. Tighten in a criss - cross pattern to specification.

3. Tighten the bolts in a mandatory torque criss - cross pattern sequence to 5.5 Nm (50 in. lbs.).





4. Connect electrical connector (2) to throttle body.
5. Install throttle body air intake hose and tighten clamp (1).
6. Connect negative battery cable.
7. Use a scan tool and perform the ETC RELEARN function.