Water Pump - Installation

5.7L/6.1L ENGINE










1. Install water pump and mounting bolts (2). Tighten mounting bolts to 28 Nm (20 ft. lbs.).
2. Make sure double ended bolt (3) is in the proper location. Tighten double ended bolt to 28 Nm (20 ft. lbs.).
3. Install thermostat Engine Coolant Thermostat - Installation.
4. Install accessory drive belt Serpentine Accessory Drive Belt - Installation.
5. Install the radiator fan assembly Cooling Fan - Installation.
6. Connect negative battery cable.
7. Evacuate air and fill cooling system.Water Pump - Coolant Air Evacuation
8. Check cooling system for leaks.Testing and Inspection