Supply Hose

INSTALLATION





1. Install reservoir end of supply hose (3) on reservoir hose fitting. Install clamp securing hose in place.





2. 2.7L/3.5L Engines - Install supply hose (3) on pump. Install clamp (2) securing hose in place.





3. 5.7L/6.1L Engines - Install supply hose (3) on pump (1). Install clamp securing hose in place.





4. 3.0L Diesel Engine - Install supply hose (3) on pump (1). Install clamp (2) securing hose in place.

5. Install air cleaner housing and inlet tube. Air Cleaner Body - Installation





6. Connect battery negative cable (2) to battery post. It is important that this is performed properly. Battery System - Battery Reconnection
7. Fill and bleed power steering system. Power Steering System Bleeding