Timing Component Alignment Marks: Locations

Timing Chain Alignment Marks

Caution - Improper timing chain installation may cause severe engine damage, refer to Timing Chain Removal and Replacement for complete service procedure. Service and Repair





For crankshaft sprocket installation procedures Crankshaft - Installation.

Align the crankshaft sprocket timing mark to the mark on the oil pump housing (3).

NOTE: Lubricate timing chain and guides with engine oil before installation.

Place the left side primary chain sprocket onto the chain so that the timing mark is located in between the two (plated) timing links (1).

NOTE: The camshaft sprockets can be allowed to float on the camshaft hub during installation.

Align the right camshaft sprocket timing mark to the timing (plated) link on the timing chain (8) and loosely position over the camshaft hub.

Verify that all chain timing (plated) links are properly aligned to the timing marks on all sprockets.