Decklid - Installation

INSTALLATION





1. With the aid of an assistant, support and position the decklid (1) to the two upper hinge brackets (3) on the vehicle.
2. Install and tighten the two screws (2) that secure each upper hinge bracket to the decklid. Tighten the screws to 28 Nm (21 ft. lbs.).
3. Install the wire harness to the decklid.





4. Connect the connector (2) of the body wire harness (1) to the latch connector receptacle (3).
5. Connect the battery negative cable.
6. Close the decklid.
7. Adjust the decklid hinge positions and upper overslam bumpers as necessary to achieve proper spacing and operation.