Front

LAMP - FRONT





1. Position the front side marker lamp (3) close enough to the mounting hole in the front fascia (1) to access and reinstall the lamp bulb and socket.
2. Align the socket and bulb with the keyed opening on the back of the front side marker lamp lens and housing unit (1).
3. Insert the socket and bulb into the housing until the socket is firmly seated.
4. Rotate the socket clockwise about 30 degrees to lock it into place.
5. Engage the integral retaining tab on the front edge of the marker lamp housing behind the front edge of the mounting hole in the fascia.
6. Using hand pressure, press the rear edge of the marker lamp lens firmly and evenly into the rear of the mounting hole far enough to engage the integral spring clip (2) on the back of the lamp housing with the rear of the mounting hole.
7. Reconnect the battery negative cable.