Spot Lamp Bulb - Removal

BULB





1. Disconnect and isolate the battery negative cable.
2. Raise the spot lamp head from the stowed position to the operating position.
3. While supporting the spot lamp head housing, remove the screw (4) at the base that secures the bezel (1) to the spot lamp head housing (3).
4. Unlock the bezel from the housing by rotating the bezel counterclockwise.
5. Remove the bezel from the spot lamp head housing.
6. Tilt the spot lamp sealed beam (2) out of the head housing far enough to access and disconnect the spot lamp wire harness connectors (5) from the terminals on the back of the reflector.
7. Remove the sealed beam from the spot lamp.