U1108

U1108-ADDITIONAL CAN B ECU DETECTED

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously.

- Set Condition:
The Totally Integrated Power Module (TIPM) detects an additional CAN B module and requires a re-configuration.





Diagnostic Test
RECONFIGURE THE TOTALLY INTEGRATED POWER MODULE
1. Turn the ignition on.
2. With the scan tool, read and record the listed modules.
3. With the scan tool, restore the vehicle configuration.
4. With the scan tool, erase DTCs.
5. Cycle the ignition from on to off three times and read the active TIPM DTCs.

Does the scan tool display this DTC as active?

Yes
- Retest system and attempt to reconfigure the TIPM.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No
- Repair is complete.
- Perform the BODY VERIFICATION TEST. Body Verification Test.