Receiver - Export

RECEIVER





An intrusion sensor receiver (1) is part of the premium version of the Vehicle Theft Security System (VTSS). The premium version of the VTSS is only available in vehicles built for certain markets, where the additional features offered by this system are required. This unit is designed to work in conjunction with the intrusion sensor transmitter to provide interior motion detection inputs to the intrusion module, which serves as the interface between the Forward Control Module (FCM), the ElectroMechanical Instrument Cluster (EMIC), sometimes referred to as the Cab Compartment Node (CCN), and the alarm siren.

The receiver is located in the passenger compartment, where it is concealed behind the right front corner of the overhead console housing and engages three latch tabs integral to the receiver housing. The ultrasonic receiver transducer (2) is aimed through a small dedicated round opening in the overhead console forward of the reading lamps and is the only evidence of the receiver that is visible from the passenger compartment.

Concealed within the receiver housing is the circuitry which includes the receive transducer. The receiver is connected to the vehicle electrical system wire harness that is integral to the headliner.

The intrusion sensor receiver cannot be adjusted or repaired and, if faulty or damaged, it must be replaced. The receiver mounting bracket is serviced as a unit with the overhead console.