Decklid - Removal

REMOVAL





1. Open the decklid.
2. Disconnect and isolate the battery negative cable.
3. Disconnect the connector (2) of the body wire harness take out for the decklid (1) from the latch connector receptacle (3).
4. Remove the wire harness from the decklid.





5. Mark both upper hinge bracket (3) locations on the decklid inner panel (1) to aid in installation.
6. With the aid of an assistant, support the decklid while removing the two fasteners (2) that secure each upper hinge bracket to the decklid.
7. Remove the decklid from the vehicle.