Outside Rearview Mirror - Installation

INSTALLATION

1. Position the outside rearview mirror to the front door.
2. Install the three nuts that secure the mirror to the front door. Tighten the nuts to 7 Nm (62 in. lbs.).
3. Connect the door wire harness connector to the mirror electrical connector.
4. Install the water shield.
5. Install the trim panel to the inside of the front door Front Door Trim Panel - Installation.
6. Reconnect the negative battery cable.

NOTE: For vehicles equipped with the optional Automatic Express Up power window feature, recalibration of this feature is required whenever power to the door module is disrupted.