Rear

INSTALLATION

1. Place the 60 split seat back into position.
2. Install the inboard and outboard mounting fasteners. Tighten bolts to 65 Nm (48 ft. lbs.).
3. Place the 40 split seat back into position.
4. Install the seat back by guiding the inboard side onto the guide post attached to the 60 split seat back.
5. Install the outboard mounting fasteners. Tighten bolts to 65 Nm (48 ft. lbs.).
6. Place both seat backs in the full up position and ensure seats lock into place.
7. Install the rear seat cushion. Seat Cushion Cover - Installation