Front

INSTALLATION





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Position the seat back cover over the seat back frame and install the headrest sleeves.
3. Position the seat back cushion on the frame and install the cover over the cushion installing hog rings as required.
4. Connect the j-straps (1 AND 2).





5. Install the seat back to the seat frame.
6. Install the seat back bolts and tighten to 40 Nm (30 ft. lbs.).





7. Position the front seat belt buckle lower anchor onto the stud near the rear of the inboard seat cushion frame. Be certain the anti-rotation tab on the anchor is engaged in the clearance hole of the frame.
8. Tighten the nut to 43 Nm (32 ft. lbs.)





9. Install the side shields (2) and install the screws.
10. Install the lumbar and recliner handles.