Front

REMOVAL

1. Raise and support the vehicle. Maintenance.





2. Remove the sensor cable routing clip (2) from the brake hose bracket (3).






NOTE: In the following step, to release the sensor connector (3) from the body wiring harness (1), move the retaining clip (2) as shown , then pull the sensor connector outward.






3. Remove the sensor connector (1) from the body wiring harness connector (4).





4. Remove the screw (3) fastening the wheel speed sensor to knuckle (1).
5. Pull the sensor head (4) out of the knuckle.
6. Remove the wheel speed sensor cable routing clip (2) from the brake hose routing bracket (5).