Front

LAMP - FRONT





1. Disconnect and isolate the battery negative cable.
2. Using a trim stick or another suitable wide flat-bladed tool, carefully pry the rear edge of the front side marker lamp lens and housing unit (3) away from the mounting hole in the front fascia (1) far enough to disengage the integral snap clip (2) on the back of the lamp from the fascia.
3. Pull the side marker lamp out from the front fascia far enough to access the bulb socket on the back of the lamp housing.
4. Firmly grasp the bulb socket on the back of the lamp housing and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the socket and bulb straight out from the keyed opening in the housing.
6. Remove the marker lamp from the fascia.