Intrusion Module - Description - Export

DESCRIPTION





An intrusion module (1) is part of the premium version of the Vehicle Theft Security System (VTSS). The premium version of the VTSS is only available in vehicles built for certain markets, where the additional features offered by this system are required. The intrusion module is located in the passenger compartment. This unit is designed to work in conjunction with the intrusion sensor transmitter and intrusion sensor receiver to provide interior motion detection and serves as the interface between the Forward Control Module (FCM), the ElectroMechanical Instrument Cluster (EMIC), sometimes referred to as the Cab Compartment Node (CCN), and the alarm siren.

The intrusion module has two integral mounts (2) that are secured behind the passenger side instrument panel, just above the glove box. Concealed within the molded plastic housing is the circuitry of the module, which includes a microprocessor. The module is connected to the vehicle electrical system by a connector of the body wire harness.

The intrusion module unit cannot be adjusted or repaired and, if faulty or damaged, it must be replaced. Should replacement of the module be necessary, please review Programming and Relearning for proper module initialization.