Backlite - Removal

REMOVAL






NOTE: Windshield removal shown, backlite similar.

1. Before proceeding with the following repair procedure, review all warnings and cautions Service Precautions.
2. Remove quarter trim panelsQuarter Trim Panel - Removal.
3. Remove the trim panel from the rear shelf Rear Shelf Panel - Removal.
4. Disconnect the wire connectors from rear window defogger terminals and, rear window mounted radio antenna, if equipped.

CAUTION: Be careful not to damage painted surfaces when cutting urethane around the backlight.

5. Using an assistant and a wire-type windshield cut-out tool (1, 3 and 4), cut and separate the urethane adhesive (2) securing the backlite to the backlite fence.
6. Carefully remove the backlite from the vehicle.