Crankshaft - Removal

REMOVAL





1. Remove engine Engine - Removal.
2. Remove the vibration damper (1) using a bolt grip puller (2)Vibration Damper - Removal.





3. Remove the rear oil seal retainerCrankshaft Rear Oil Seal Retainer - Removal.
4. Remove the oil panEngine Oil Pan - Removal.





5. Remove the oil pump pickup (1).
6. Remove the windage tray/oil pan gasket.
7. Remove the timing chain cover Engine Timing Cover(s) - Removal.





8. Remove the oil pump (1)Engine Oil Pump - Removal.





9. Remove the timing chain (5) and sprockets (1,3) Timing Chain & Sprockets - Removal.





10. Identify rod bearing caps before removal. Remove rod bearing caps with bearings.





11. Identify main bearing caps (1) before removal.





12. Remove main bearing cap bolts.
13. Remove main bearing caps (1) and bearings one at a time.





14. Remove the thrust washers.
15. Remove the crankshaft out of the block.