Transmission Input Shaft - Removal

REMOVAL

Special Tools:











NOTE: If input shaft is damaged behind the seal, the transmission must be disassembled and inspected.

1. Measure output shaft end play and record number.
2. Remove clutch slave cylinder from transmission adapter plate.
3. Remove front adapter plate bolts (1).





4. Pry front cover adapter loose.
5. Hold input shaft while removing adapter (2).
6. Remove input shaft seal from adapter with a seal puller.
7. Clean and inspect all sealing surfaces for wear or damage.





8. Lift countershaft slightly and remove input shaft (2) from transmission (1).





9. Remove input shaft bearing (1) with Splitter (2) and a press.