Impact Sensor - Installation

SENSOR, Impact

INSTALLATION

FRONT







1. Position the front impact sensor in the correct location and install the two retaining screws (2). Tighten screws (2) to 7 N.m (62 in. lbs.).
2. Connect the front impact sensor electrical connector (3).

NOTE: If replacing the left front impact sensor, the air intake system needs to be installed.

WARNING: Do not connect the battery negative cable. If the system test is not performed first it may result in serious or fatal injury.

SIDE

DOOR







1. Position the door mounted impact sensor (3) in the correct location and install the two retaining screws (2). Tighten screws (2) to 7 N.m (62 in. lbs.).
2. Connect the door mounted side impact sensor electrical connector (4).
3. Install the door trim panel.

WARNING: Do not connect the battery negative cable. If the system test is not performed first it may result in serious or fatal injury.

QUARTER PANEL







1. Position the quarter panel mounted side impact sensor (4) in the correct location and install the two retaining screws (1). Tighten screws (2) to 7 N.m (62 in. lbs.).
2. Connect the quarter panel mounted side impact sensor electrical connector (2).
3. Install the lower quarter trim panel.

WARNING: Do not connect the battery negative cable. If the system test is not performed first it may result in serious or fatal injury.