Engine - Oil Filter Replacement Procedure

NO.: 09-18-93

GROUP: Engine

DATE: Nov. 12, 1993

SUBJECT:
Oil Filter Removal

MODELS:

1993 (B9) Colt Summit

NOTE:
THIS BULLETIN APPLIES TO VEHICLES EQUIPPED WITH THE 1.8L ENGINE

DISCUSSION:

The oil filter replacement procedure may not be apparent when first attempting filter removal.

Replacement Procedure:

1. With the vehicle raised on a hoist, cover the A/C belts with shop towels or other suitable material to protect them from any oil spillage.

2. Loosen the filter and drain as much oil as possible into a suitable container.

3. The filter can then be removed by working it between the A/C compressor and power steering pump, then between the rear of the power steering high pressure hose, and then out between the A/C compressor clutch and frame rail.

CAUTION:
THE ENGINE OIL MAY BE HOT AND THERE ARE SEVERAL ENGINE COMPONENTS IN THE AREA THAT MAY ALSO BE HOT.

4. Reverse procedure for filter installation.

POLICY: Information Only.