Rear

Fig. 21 Removing lower arm. Colt Vista & Summit Wagon w/AWD:

Fig. 22 Removing lower arm. Colt Vista & Summit Wagon w/FWD:

1. When replacing lower arm disassemble in sequence as shown, noting the following:
a. When removing shock absorbers from lower arm, support lower arm with suitable jack.
b. Make mating marks on lower arm shaft assembly and crossmember, then loosen shaft assembly nut.
c. Lower rear end of lower arm, then remove coil spring.
2. Reverse procedure to install, ensuring that both ends of coil spring are aligned with spring groove.