Assembly

1. Install regulator valve.
Install retainer plate using Installer/Remover 6302.




2. Install torque converter control valve and torque converter clutch valve. Install dual retainer plate with Installer/Remover 6301.




3. Install check balls and retainers.




4. Install thermal valve.




5. Install separator plate from transfer plate.
Install 0/0 clutch check ball and oil screen.




6. Install 24 accumulator retaining plate screws (2).




7. Install manual shaft screw to secure manual shaft.




8. Position detent as shown.




9. Install valve body.




10. Using a screwdriver, push guide bracket away to park sprag rollers.




11. Install valve body attaching bolts (18).




12. Install oil filter.




13. Install oil pan.

NOTE: Apply a 1/8 inch wide bead of Loctite 18718 or equivalent.




14. Install oil pan bolts.

NOTE: Use Loctite 18718 or equivalent under bolt beads.