Airbag System

Code No.14 Analog G sensor system

[Explanation]

The SRS-ECU monitors the analog G sensor output and outputs this code when it detects a sensor failure, abnormal sensor characteristics or abnormal sensor output.

Probable cause of trouble

SRS-ECU out of order

Caution

After the ignition switch has been placed at the LOCK position and the negative (-) terminal of the battery has been disconnected, wait for more than 60 seconds before starting work. Wind a tape around the disconnected (-) terminal for insulation.

Since a defective analog G sensor in the SRS-ECU is suspected, replace the SRS-ECU.