Removal

REMOVAL






NOTE: Before proceeding, Warning Brakes - Caution .

NOTE: The procedure below applies to either of the two parking brake cables.

1. Disconnect and isolate the battery negative cable from its post on the battery.
2. Block the tire and wheel assemblies so the vehicle does not move once the vehicle parking brake lever is released.
3. Remove the floor console Floor Console - Removal.
4. Release and lower the parking brake lever (5).
5. Loosen the adjusting nut (4) on the equalizer output cable and disconnect the brake actuation cables from the equalizer.
6. Remove the parking brake cables from the parking brake cable equalizer (3).





7. Raise and support the vehicle Maintenance.
8. Remove parking brake cable from each mounting bracket.
9. Disconnect brake cable end (2) from caliper bracket and slide brake cable through bracket.
10. Remove parking brake cable from vehicle.