Dome Lamp Bulb - Installation

BULB

CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.





1. Align the ends of the bulb (3) with the bulb holders within the dome lamp unit housing.
2. Carefully press the bulb firmly and evenly into the bulb holders until both ends of the bulb are firmly seated.
3. Swing the back cover (1) over the back of the lamp housing.
4. Press firmly and evenly over the notch on each side of the loose end of the back cover until it snaps into the housing, one side at a time.
5. If equipped, engage the Blue And Me microphone wiring (2) into the retainer on the back cover.
6. Reinstall the dome lamp unit into the vehicle. Dome Lamp - Installation.
7. Reconnect the battery negative cable.