Clutch Pedal Assembly: Adjustments

NOTE: Clutch pedal total travel is not adjustable on these models.

1. Check clutch pedal free travel by measuring distance from clutch pedal pad to steering wheel rim, then depress clutch pedal until free travel is diminished and take a second measurement. If the difference between the two measurements is less than 1/2 inch, the clutch linkage must be adjusted.
2. Loosen and back off the two jam nuts several turns, then adjust the first jam nut until a free travel measurement of 1 and 1/2 inches is obtained at the clutch pedal.
3. While holding the second jam nut, tighten the first jam nut against the second one.
4. Recheck free pedal travel and readjust as necessary.