Technical Instructions, Special Tools and Parts Ordering Information

TECHNICAL INSTRUCTIONS:

Ambulance inspection procedure instructions and inspection sheet forms will be supplied to all participating dealerships under separate cover. Additional instructions and forms are available from Service Recalls, Ford International Export Sales, Wixom. Installation instructions for the various fuel venting and emissions control system modification kits are packaged with the kits. One set of installation instructions is also supplied with this bulletin.

SPECIAL TOOL REQUIREMENTS:

Completion of the modification kit installation procedure requires a fuel system pressurization test. In order to perform this test, it is necessary to use a Rotunda #134-00003 fuel tank assembly leak tester. Each dealer having involved ambulances will be supplied with a leak tester kit, at no charge. This kit contains the test assembly as well as a special filler cap and several aluminum plugs (needed to cap vent lines). To obtain the leak tester, place your order to FIES, Wixom, attention: Service Recall Unit.

(NOTE -- This test procedure requires a tank of COL, Argon or Nitrogen Gas; if not already available, make necessary arrangements to obtain a tank of one of these inert gases. Shop air cannot be used since introduction of oxygen during this test procedure presents a fire hazard).

PARTS ORDERING INFORMATION:

Do not order recall parts from Windsor Export Supply. Order all requirements directly from Wixom using the mailing address on page No. 1 of this Bulletin. For more urgent handling, use cable address "RECALLS - FORDEX, WIXOM, MICHIGAN". For locations having telex facilities, our telex Ford private line code is FED and commercial telex code is 71 669777 answerback Ford DMO WIX. Our telephone number in Wixom, Michigan, is area code (313) 344-5641. Please give the part number, description, quantity and recall number when ordering.

Order your parts kit requirements using the following information: