Camber
| Camber Note 1: Side to side camber readings must be within 7 (degrees), when truck frame to axle riding height is within 0-.16 inch of side to side. Note 2: Camber angle on 1986-87 F-350 w/Dana 60 monobeam axle is 1.5 degrees. | ||
| Ride Height | 5.1 in | -1 5/8 to - 1/4 |
| 5.3 in | -1 1/8 to + 1/4 | |
| 5.5 in | -5/8 to + 3/4 | |
| 5.7 in | -1/8 to +1 1/4 | |
| 5.9 in | +3/8 to +1 3/4 | |
| 6.1 in | +7/8 to +2 3/8 | |
| 6.3 in | +1 1/2 to +2 7/8 | |
| 6.5 in | +2 to +3 1/2 | |
| 6.7 in | +2 1/2 to +4 | |
| 6.9 in | +3 1/8 to +4 1/2 |