Front

Fig. 23 Front stabilizer bar replacement. All 1983---84, 1985 Bronco II 4 X 2 & 1985---87 Ranger:

ALL 1983-84, 1985 BRONCO II 4 X 2 & 1985-87 RANGER
1. Remove nuts and U-bolts retaining lower shock bracket/stabilizer bar bushing to radius arm. Remove retainers and stabilizer bar and bushings, Fig. 23.
2. Reverse procedure to install.

Fig. 24 Front stabilizer bar replacement. 1985---87 Bronco II 4 X 4:

1985-87 BRONCO II 4 X 4
1. Remove bolts and retainers from center and righthand end of stabilizer bar, Fig. 24.
2. Remove stabilizer bar to stabilizer link attaching nut, bolt and washer.
3. Remove stabilizer bar and bushings.
4. Reverse procedure to install.

Fig. 25 Front stabilizer bar replacement. 1986---87 Bronco II 4 X 2:

1986-87 BRONCO II 4 X 2
1. Remove stabilizer link assembly nut and washer, then disconnect stabilizer link assembly from front I-beam axle, Fig. 25.
2. Remove stabilizer bar attaching bolts, then the stabilizer bar retainers from the stabilizer bar assembly.
3. Remove stabilizer bar from vehicle.
4. Reverse procedure to install.