Suspension: Description and Operation

�LPFig. 1 Front suspension 4 X 2 models. All 1983---85 & 1986---87 Ranger:

4 X 2 MODELS
The twin I-beam suspension consists of coil springs, I-beam axle arms, radius arms, upper and lower ball joints, spindles, tie rods, shock absorbers and an optional stabilizer bar.

Fig. 3 Front Suspension. All 4x4 Models:

4 X 4 MODELS
The independent front suspension used on four wheel drive models is comprised of a two-piece front driving axle assembly, two coil springs and two radius arms, Fig. 3. The front driving axle consists of two independent axle arm assemblies. One end of each axle arm assembly is mounted to the frame, with the opposite end supported by the coil spring and radius arm.