Engine Mount: Service and Repair

Fig. 1 Front & rear engine mounts. 4-122:

Fig. 2 Front & rear engine mounts. 4-140:

FRONT
1. Remove nuts from top of insulator brackets.
2. Raise and support vehicle, then lift engine until it clears mounts.
3. Remove attaching screws and mounts.
4. Reverse procedure to install. Refer to Figs. 1 and 2 for torque specifications.

REAR
1. Raise and support vehicle.
2. Remove the two nuts attaching rear insulator to engine support, Figs. 1 and 2.
3. Using a suitable jack and wood block placed between engine and jack, raise transmission.
4. Remove bolts attaching mount to rear of engine and remove mount.
5. Reverse procedure to install. Torque bolts to 60---80 ft. lbs. and nuts to 71---94 ft. lbs.