Power Steering Gear - Housing Modification
83ford23 Article No. 83-3-18STEERING GEAR - POWER - UNIQUE FOR 2.8L V6 ENGINE
LIGHT TRUCKS 1983 RANGER
Figure 28:
One of the lugs on the Ford integral power steering gear (XR-50) valve housing has been removed as shown in Figure 28 to increase clearance between the gear assembly and the fuel pump on the 2.8L V6 engine on Ranger/Bronco II vehicles.
Whenever replacing a gear assembly, control valve assembly or control valve housing on Ranger/Bronco II it MUST be without the lug as shown.
Installation of a gear assembly with the lug on subject vehicles may result in interference with the fuel pump under certain operating conditions.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"