Bumper - Front

Bumper - Front

MKX Shown Edge Similar










1. Remove the front bumper cover. For additional information, refer to Bumper Cover- Front Service and Repair.

2. Remove the 6 front bumper bolts (3 each side).
- To install, tighten to 67 Nm (49 lb-ft).






3. Remove the 4 upper and lower bumper-to-radiator support bolts (2 each side).
- To install, tighten to 9 Nm (80 lb-in).






4. Remove the front bumper.

5. To install, reverse the removal procedure.