Trunk / Liftgate Interior Trim Panel: Service and Repair

Liftgate Trim Panel

NOTE: Non-powered liftgate shown, powered liftgate similar.










1. Remove the power liftgate rod-to-liftgate nut cover and nut, if equipped.
- To install, tighten to 11 Nm (97 lb-in).






2. NOTE: The back of the liftgate trim panel is shown indicating the location of the liftgate trim panel retainers.
Remove the liftgate lower trim panel.

- Remove the 4 liftgate lower trim panel screws.

- Pull outward on the liftgate lower trim panel to release the liftgate lower trim panel retainers.






3. Remove the liftgate upper trim panel.

4. To install, reverse the removal procedure.