Water Pump: Service and Repair

Coolant Pump - 2.0L GTDI

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Material(s)

NOTICE: The cooling system is filled with Motorcraft(R) Specialty Green Engine Coolant or. Always fill the cooling system with the manufacturer's specified coolant. Chemically flush the cooling system if a non-specified coolant has been used. REFER to Cooling System Flushing . Failure to follow these instructions may damage the engine or cooling system.

NOTICE: Use Motorcraft(R) Specialty Green Engine Coolant or. Use the same type of coolant that was originally used to fill the cooling system. Do not mix coolant types. Mixing coolant types degrades the coolant corrosion protection and may damage the engine or cooling system.

NOTICE: Motorcraft(R) Specialty Green Engine Coolant is very sensitive to light. Do NOT allow this product to be exposed to ANY LIGHT for more than a day or two. Extended light exposure causes this product to degrade.

NOTE: During normal vehicle operation, may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate the engine coolant has degraded nor does it require the engine coolant to be drained, the system to be flushed, or the engine coolant to be replaced.






Removal

1. REFER to Cooling System Draining, Filling and Bleeding - 2.0L GTDI .

2.





Loosen 2 turns.

3.





4.





5.





Discard the O-ring seal.

Installation

1.





1. Apply Motorcraft(R) Specialty Green Engine Coolant or.
2. 10 Nm (89 lb-in).

2.





Finger-tight.

3.





4.




20 Nm (177 lb-in).

5. REFER to Cooling System Draining, Filling and Bleeding - 2.0L GTDI .