Climate Control - DATC

Blower Motor Speed Control

Removal

1. Remove the 3 RH (Right Hand) lower instrument panel insulator retainers and the RH (Right Hand) lower instrument panel insulator.





2. Disconnect the blower motor speed control electrical connector.

3. Remove the 2 blower motor speed control screws.

4. Remove the blower motor speed control.

Installation

1. Install the blower motor speed control.



2. Install the blower motor speed control screws.

3. Connect the blower motor speed control electrical connector.

4. Install the RH (Right Hand) lower instrument panel insulator and the 3 RH (Right Hand) lower instrument panel insulator retainers.