Halfshaft Seal, LH

Halfshaft Seal, LH

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Special Tool(s)






Removal

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Lifting Points .

2. Remove the front LH (Left Hand) halfshaft. REFER to Halfshaft - LH .

3. Using an awl, poke a small hole in the halfshaft seal.





4. Using a dent puller, remove and discard the halfshaft seal.





Installation

1. Install a new halfshaft seal on 307-626 and 205-153 (T80T-4000-W)






2. Using 307-626 and 205-153 (T80T-4000-W) install the LH (Left Hand) halfshaft seal.





3. Install the front LH (Left Hand) halfshaft. REFER to Halfshaft - LH .

4. Check and top off the transmission fluid to the correct level. To check the transmission fluid level, REFER to Transmission Fluid Level Check .