Halfshaft Seal, RH

Halfshaft Seal, RH

WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.

Special Tool(s)






Removal

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Lifting Points .

2. Remove the 4 retainers and the underbody shield.





3. Remove the RH (Right Hand) halfshaft. REFER to Halfshaft - RH, Front Wheel Drive (FWD) .

4. Using an awl, poke a small hole in the halfshaft seal.





5. Using a dent puller, remove and discard the halfshaft seal.





Installation

1. Install a new halfshaft seal on 307-626 and 205-153 (T80T-4000-W)






2. Using 307-626 and 205-153 (T80T-4000-W) install the RH (Right Hand) halfshaft seal.





3. Install the RH (Right Hand) halfshaft. REFER to Halfshaft - RH, Front Wheel Drive (FWD) .

4. Check and top off the transmission fluid to the correct level. To check the transmission fluid level, REFER to Transmission Fluid Level Check .