Halfshaft Seal, LH

Halfshaft Seal, LH

Special Tool(s)






Material(s)






Exploded View










Removal

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Lifting Points .

2. Remove the front LH (Left Hand) halfshaft. REFER to Halfshaft - LH .

3. Inspect the halfshaft hub for wear or damage and install a new halfshaft if necessary.

1. Inspect the differential seal surface.
2. Inspect the halfshaft bushing surface. If this surface is damaged, inspect the halfshaft bushing for damage.
3. Inspect the differential side gear splines.






4. Using an awl, poke a small hole in the halfshaft seal.





5. Using a dent puller, remove and discard the halfshaft seal.





Installation

1. Install a new halfshaft seal on 307-582A and 205-153 (T80T-4000-W)






2. Using 307-582A and 205-153 (T80T-4000-W) install the LH (Left Hand) halfshaft seal.





3. NOTICE: Failure to install the seal protector when installing the halfshaft may damage the seal.

Install the seal protector provided with the new halfshaft seal. Follow the instructions provided with the new seal.





4. Install the front LH (Left Hand) halfshaft. REFER to Halfshaft - LH .

5. Check and top off the transmission fluid to the correct level. To check the transmission fluid level, REFER to Transmission Fluid Drain and Refill .