Halfshaft Seal, RH

Halfshaft Seal, RH - Front Wheel Drive (FWD)

Special Tool(s)






Material(s)






Exploded View










Removal

1. With the vehicle in NEUTRAL, position it on a hoist. REFER to Lifting Points .

2. Remove the RH (Right Hand) front wheel and tire. REFER to Wheel and Tire .

3. Remove the RH (Right Hand) halfshaft. REFER to Halfshaft - RH, Front Wheel Drive (FWD) .

4. Inspect the halfshaft hub for wear or damage and install a new halfshaft if necessary.

1. Inspect the differential seal surface.
2. Inspect the halfshaft bushing surface. If this surface is damaged, inspect the halfshaft bushing for damage.
3. Inspect the differential side gear splines.






5. Using an awl, poke a small hole in the halfshaft seal.





6. Using a dent puller, remove and discard the halfshaft seal.





Installation

1. Install a new halfshaft seal on 307-582A and 205-153 (T80T-4000-W)






2. Using 307-582A and 205-153 (T80T-4000-W) install the RH (Right Hand) halfshaft seal.





3. Install the RH (Right Hand) halfshaft. REFER to Halfshaft - RH, Front Wheel Drive (FWD) .

4. Install the RH (Right Hand) wheel and tire. REFER to Wheel and Tire .

5. Check and top off the transmission fluid to the correct level. To check the transmission fluid level, REFER to Transmission Fluid Drain and Refill .