F7 Check Circuit 603 Between Cluster and Jumper Connector

- Ignition switch OFF.

- Disconnect 4-pin and 15-pin connectors at the ABS unit.

Connector:

Connector:

- Measure resistance between pin 2 (Y) of the 4-pin connector and pin 1 (DG) of the 15-pin connector.

- Is resistance less than 5 ohms?

YES -- Go to F8. F8 Check Circuit 603 Between Cluster and Control Module

NO -- Service circuit 603 (Y) for open.

NOTE: Circuit 603 changes color from DG to Y as it passes through the harness connector.