Diesel Data: Automotive Repair
Home >> Ford >> 1996 >> Mustang V6-232 3.8L >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Service and Repair >> Removal and Installation Procedures

Removal and Installation Procedures

Special Service Tools Desired

Seat Belt Bolt Bit (#50 Torx) T77L-2100-A






REMOVAL
1. Position front seat forward to reach front safety belt buckle end.
2. Remove front safety belt buckle end retaining bolt. On LH side, disconnect safety belt buckle switch connector.

INSTALLATION
1. On LH side, connect safety belt buckle switch connector. Install front safety belt buckle end and front safety belt buckle and anchor bolt. Tighten to 34-46 Nm (25-33 lb ft).
2. Check the restraint system for proper operation and perform Functional Safety Test.
Diesel-Data.com