Brake Disc
Brake DiscRemoval
1. Release the parking brake.
2. Remove the wheel and tire.
3. Detach the parking brake cable from the brake caliper.
1 Pull back the parking brake lever.
2 Disconnect the cable from the parking brake lever.
3 Remove the conduit retaining clip (if equipped).
4 Disconnect the cable and conduit.
4. CAUTION: Suspend the brake caliper and anchor plate to prevent load being placed on the brake hose.
Detach the brake caliper and anchor plate from the wheel knuckle.
5. Remove the brake disc.
^ Remove the retaining clip (if equipped).
Installation
1. To install, reverse the removal procedure.
2. Adjust the parking brake cable.