Instrument Cluster / Carrier: Service and Repair

INSTRUMENT CLUSTER

REMOVAL

NOTE: If a new instrument cluster is being installed connect WDS. Upload the instrument cluster configuration information using the programmable modules installation routine prior to commencing the removal of the instrument cluster.







1. Detach the instrument cluster bezel. (Steering wheel removed for clarity).







2. Remove the instrument cluster bezel.
- Disconnect the luggage compartment release switch electrical connector.







3. Detach the instrument cluster.







4. CAUTION: The instrument cluster must be kept upright to avoid silicone liquid leaking from the gauges.

Remove the instrument cluster.
1 Release the locking tang.
2 Disconnect the instrument cluster electrical connector.

INSTALLATION

1. NOTE: If a new instrument cluster is being installed connect WDS. Download the instrument cluster configuration information using the programmable modules installation routine after the installation of the instrument cluster.

To install, reverse the removal procedure.